Continental Carbonic Logo
toll free:

800-DRY-ICE2

Dry Ice Blasting:

1-844-ICE-BLST

Cold Jet E-CO2 150

DRY ICE BLASTING + ABRASIVE

Command Air CA-250 Portable After Cooler / Air Filter available from Continental CarbonicThe E-CO2 150 mixed media dry ice + abrasive media solution is a custom 1.5 cubic feet pressurized abrasive pot, and can be paired with a compatible Cold Jet dry ice blaster (PLT® 60,or Aero 80FP or C100). The system has been developed specifically to feed Cold Jet's proprietary mix of dry ice and abrasive media.

The system is patented to enable accurate dosing of abrasive material, self-regulating capabilities and the integration of applicator control mechanisms to ensure dry ice and the abrasive feed together simultaneously when the trigger is pulled.

Cold Jet's blasters feature the patented Sure Flow System, which ensures a full hopper can be run through the system without the risk of clogging ensuring a pulse-free blast stream that cleans uniformly on every pass. With automated hopper agitation and the ability to operate with long lengths of hose, the Cold Jet system will enable cleaning in locations never before possible.

 

Key Benefits:

  • Reduce respirable and nuisance dust by up to 97% (below OSHA guidelines)
  • Achieve SP10 | SA 2.5 | NA 2
  • No free silica or beryillium
  • Limited to no containment or masking
  • No moisture and no residue = no drying time
  • Safely clean and prepare surface with non-destructive dry ice
  • Increase performance and aggression by adding in an abrasive
  • Increased operator visibility
  • Eliminate manual methods
  • Environmentally responsible
  • Reduced cleanup and disposal costs
  • Removed soluble salts
  • Eliminates water wash and degreasing protocols
  • 1 - 5 mil surface preparation finish with fine, medium and course grit 10x abrasive

Industries & Applications

  • Consruction
  • Lead Paint Abatement
  • Marine
  • Military (DoD)
  • Oil & Gas
  • Power Generation & Energy Infrastructure
  • Road, Highway & Bridge Infrastructure (DoT)
  • Transportation & Automotive

E-CO 150 Specifications:

  • Capacity: 150 lbs (68 kg)
  • Dimensions (Length x Width x Height)
    • 24 in (61 cm) x 21 in (53 cm) x 39 in (99 cm)
  • Weight: 135 lbs (61 kg)
  • Combine with the Aero 80FP or the Aero2 PLT® 60

E-CO2 150 Spec Sheet

E-CO2 150 Manual